front-page
what-we-do

THE MAGIC OF ELECTROSTATIC

The electrostatic loudspeaker is very simple in concept, but difficult to construct successfully in practice. lts operation relies on electrostatic attraction and repulsion, in much the same way as a piece of thin paper attracted to a rubber balloon that is charged by rubbing it against fabric.

civilian-craft

HOW DOES IT WORK?

The electrically charged ultra-thin conductive film diaphragm is tensioned and placed close between two metal grids. When a high voltage audio signal is applied to the metal grids, the diaphragm moves in response to the signal, moving towards the grid which at that instant is oppositely charged, and away from the grid which has the same charge as the diaphragm. The diaphragm responds in an essentially linear manner, producing sound waves which are a very accurate reproduction of the original sound.

military-craft

WHY IS IT BETTER?

Imagine a normal speaker as a point source, from which the sound waves produced diffract at a great angle. This causes rapid decrease in volume and quality over a short distance.
Then imagine a flat electrostatic panel producing sound from the same input signal. This time the sound waves are produced over a large, flat area, therefore have very little diffraction and the volume decreases much less over the same distance.

the-wall-street-journal

The Wall Street Journal

Keith Wagstaff

KingSound KS-H3

You can’t travel to 1920s Chicago to hear the jazz legends play, but with the help of these electrostatic beauties—which use electrically charged diaphragms to produce undiluted sound—you’ll hear every plucked bass note and horn blast as if you were there.

Keith WagstaffThe Wall Street Journal
engine-development

DEVELOPMENT

We have been advancing at a rapid rate when it comes to quality and reliability, coming from years of research in our lab and, most importantly, feedback from audiophiles across the world over the last 10 years. In return, we make high quality products for our customers, bringing genuine high fidelity back into your listening room.

full-scale-avionics-navdrives

DESIGN & ERGONOMIC

Our headphones were developed to be lighter and comfortable. Thanks to their wide-open soundstage, and their ultra-low distortion, minimizes listening fatigue. With an amazing industrial look. The perforated, machined ear-cups are open, so you can hear external sound from around you.

cnet

Cnet

 Steve Guttenberg

Astonishing headphones with clarity like you've never heard before

I’m a lucky guy; I regularly get to check out the world’s best-sounding headphones, but I was truly shaken and stirred by the KingSound KS-H3 electrostatic headphones. If you get to hear these headphones, start with well-recorded acoustic music and you’ll feel like you’ve been teleported back through time to the event. The KS-H3’s abilities in that area are simply astonishing, it sounds better than the best Audeze, Hifiman, or Oppo planar magnetic headphones, or even the best dynamic headphones, like the Beyerdynamic T 1 or AKG K812. They all sound a little veiled and diffuse after you spend some quality time with the KS-H3.

Steve GuttenbergCNET
you-wake-up

Be seduced …

Are you craving for ultimate transparency, these Kingsound KS-H4 will be a mind-blowing experience. Acoustic guitars, pianos, voices and percussion instruments sound more like themselves than they do over other headphones.

An another cool feature, you can play music at a fairly low volume level without losing detail.

If you want to see in a more detailed way our headphones, please use the pointer of your mouse to open a new page for a 360° view.

360° View

IMG_8269

stereo-times

Stereo Times

Frank Alles

Fit for a King!

In my view, the combination of the KS-H3 headphones and the M-20 OTL tube amplifier/energizer bring a new level of transparency and musical enjoyment to headphone listening. They are highly resolving, superbly balanced and wonderfully musical devices that will provide years of blissful music listening and gratification to those who are fortunate enough to own them. Once you hear this fine headphone system with your own ears you may break out in song as the talented music artist Sade did when she sang “touching the very part of me, it’s making my soul sing, I’m crying out for more—your love is King.”

Frank AllesStereo Times
your-boards-light-up

360° View

 IMG_5492

THE PERFECT COMPANION…

The Kingsound is ideal for driving the high impedance electrostatic drivers without any output transformer in the signal path to limit bandwidth or otherwise degrade the purity of the sound.

This perfect companion contains a total of seven vacuum tubes. This includes two 12 AX7, one 6V6, and four 6P15 output tubes.

Feel free to check in a more detailed way the Kingsound M-20 by using the pointer of your mouse to rotate the image in a 360° view.

audio-head

Audio-Head

AudioHead

The KingSound KS-H3 and M-10

The H-3 and M-10 combo by KingSound is quite the killer combo. For those interested in electrostatic headphones it offers a very cost efficient way to enter into the field. For those just looking for a great sounding headphone rig for their home, the two overachievers offer a great value in terms of both comfort, construct and especially sound quality for the $1k – $1.5k range. And yes, these guys have the potential to outperform rigs 2x their cost – please pardon the horrible audiophile review cliché. Highly recommended.

AudioHead
ship-stats

KINGSOUND SERIES IN IMAGES

This is unmistakably a high-resolution headphone experience. The transparency, extraordinarily low distortion, and sensitive dynamic resolution that are thought of as hallmarks of electrostats are evidenced abundantly, with special regard for harmonic richness and tonal integrity.

It’s almost impossible to pay attention to mundane issues pertaining to “sound” – the KingSound just gets entirely out of the way and let’s the magic and bliss flow through.

So we invite you to check in a more detailed way our products:

qobuz

Qobuz

 Philippe Daussin

Top quality at reasonable price, and Qobuzissime!

It is really nice to see some brands still offer their products with great quality without succumb to the usual inflation. The KS-H3 Headphone and the M-10 Amplifier do honour to Kingsound for their high class performance, their beautiful construction and their prices are within reach to a great amount of amateurs. Bravo and Qobuzissime!

Philippe Daussin Qobuz
we-present-kingsound-m-series

We present Kingsound KS-H series

Kingsound KS-H3

479€RRP
479€RRP
h2
  • 10Hz - 46kHzFrequency Response:
  • 113kΩ (at 10kHz)Impedance:
  • 150mV (100V Output)Rated Input Level:
  • 116dBMaximum Output Sound Level
  • 140pFElectrostatic Capacity
  • 550 VdcStandard Bias Voltage
  • 0.42kgWeight:

Kingsound KS-H3

699€RRP
699€RRP
h2
  • 6Hz - 46kHzFrequency Response:
  • 113kΩ (at 10kHz)Impedance:
  • 150mV (100V Output)Rated Input Level:
  • 116dBMaximum Output Sound Level
  • 140pFElectrostatic Capacity
  • 550 VdcStandard Bias Voltage
  • 0.46kgWeight:

Kingsound KS-H3

899€RRP
899€RRP
h2
  • 6Hz - 42kHzFrequency Response:
  • 115kΩ (at 10kHz)Impedance:
  • 150mV (100V Output)Rated Input Level:
  • 116dBMaximum Output Sound Level
  • 139pFElectrostatic Capacity
  • 550 VdcStandard Bias Voltage
  • 0.27KgWeight:
we-present-kingsound-m-series

We Present Kingsound M Series

Kingsound KS-H3

429€RRP
429€RRP
h2
  • 1Hz - 50kHz (-3dB at 40Vrms/output)Frequency Response:
  • 24kΩInput Impedance:
  • 150mV (100V Output)Rated Input Level:
  • >300Vrms (<1% THD)Max. Output Voltage:
  • 58dBGain:
  • 0.01% (à 100Vrms / 1kHz output)Harmonic Distorsion:
  • 4.4kgWeight:

Kingsound KS-H3

1299€RRP
1299€RRP
h2
  • 10Hz - 20kHz (40Vrms/output)Frequency Response:
  • 47kΩInput Impedance:
  • 150mV (100V Output)Rated Input Level:
  • 2 x 160VrmsMax. Output Voltage:
  • 58dBGain:
  • 0.01% (à 100Vrms / 1kHz output)Harmonic Distorsion:
  • 5.2kgWeight

Kingsound KS-H3

449€RRP
449€RRP
h2
  • 2Hz - 24kHz (90Vrms/output)Frequency Response:
  • 20kΩInput Impedance:
  • 150mV (100V Output)Rated Input Level:
  • 300Vrms / 3V vrms 3.5mm OutputMax. Output Voltage:
  • 60dB ESL / 34dB 3.5mm OutputGain:
  • 0.01% (à 100Vrms / 1kHz output)Harmonic Distorsion:
  • 0.45kgWeight
were-you-can-find-us

Where can you find us?

Our products were developed to work perfectly together and when our headphones and amplifiers are combined they can achieve a new level of transparency and quality when we compare to others headphones in the market. Other of ours main objectives, is to offer to all the audiophiles in the world, our products at a real low price based in the electrostatic technology.

You can always look to our list of authorized dealers, to find one near to you, or you can always contact us for more informations. Will be our pleasure to help you find a dealer next to you.

We are taking the first steps in the European market. If you are looking to became a dealer please contact us at the end of the page.

You can find us here
devenir-revendeur

Becomming Reseller

If you are reading this page you are looking at the right place to become a Kingsound reseller. We are actively looking for new business partners, because we believe we have in hands amazing products.

You are a Hi-Fi specialist and you are looking to expand your catalogue with high quality products. Please reach to us by filling the following form.

We will return to you really soon.